??多人牛牛??

Website announcement: Asia-Pacific companies focus on research and development of drying equipment manufacturing plants, specializing in the production of programmable baking boxes, clean, nitrogen-filled, vacuum, explosion-proof and other specifications of far-infrared baking boxes, as well as printed boards and electronic capacitors in the electronics industry , LED optoelectronic components and other special production process needs. Back to ??多人牛牛?? Business email contact us


Current page: ??多人牛牛?? >> Products
| PRODUCTS Products | PRODUCTS


其他特规定制烘箱 >> 油桶烘箱 Category: Other Specially Designed Ovens >> Oil Drum Ovens [ Close this page ]
ATA oil drum oven 1


Specification model: YT881-5 hot air circulation drying box

Device name:
Hot air circulation oven TS881-567L
Electrical control box location
Left
Equipment Model:
YT881-TG
Working temperature range: ℃
RT ~ 150 ℃
Use voltage:
380V / 50HZ
Customer usage
Product warm-up
heating power:
7.2KW / minute 1 group heating control
Temperature control accuracy: ℃
± 1 ℃
Blasting power:
750W / 380V * 1
Temperature uniformity: ℃
± 2 ℃% (under no-load constant temperature state)
1.   Standard sizes:
1-1 equipment internal dimensions:
500 * 840 * 1350
(Depth * Width * Height) Unit: mm
1-2 equipment external dimensions:
700 * 1200 * 1760 prevailing in kind
(Depth * Width * Height) Unit: mm
2.   Equipment making materials and methods : (The equipment uses Q235 material and has undergone antirust treatment.)
2-1 equipment components:
Cabinet, air duct, air intake, exhaust, heating element, circulating fan, electronic control system, etc.
2-2 Equipment shell material:
Q235 cold steel plate, sheet metal bending, rivet, electric welding and oxygen protection welding, splicing. Surface baking paint treatment thickness: 1.2mm
2-3 equipment shell frame:
4 # Angle Steel (Wugang)
2-4 Equipment liner material:
SUS2011.2mm stainless steel plate, sheet metal bending, rivets, screws, argon arc welding, splicing. (Wugang)
2-5 Equipment air duct material:
SUS2011.2mm stainless steel plate, sheet metal bending, rivets, screws, argon arc welding, splicing. (Wugang)
2-6 equipment internal frame:
Welded from 4 # channel steel to 6 # channel steel (Wugang)
2-7 equipment bottom frame:
Welded from 4 # channel steel to 6 # channel steel (Wugang)
3.   Equipment insulation materials and related standards :
3-1 Thermal insulation material
Filling material: 100K grade high-density ultra-fine aluminum silicate glass fiber, with a temperature resistance of 850 ° C.
3-2 Thermal insulation thickness
Each part is designed with a thickness of 100mm according to the temperature rise outside the furnace and energy saving considerations.
3-3 Thermal conductivity:
Thermal conductivity is 0.0048 ∧m / ℃
3-4 Surface temperature rise:
According to JB5220-91 industry guarantee, the working temperature of the drying box does not exceed 200 ℃, the surface temperature is not greater than room temperature plus 25 ℃.
4.   Coating treatment method, material and color :
4-1 Processing method:
The equipment is polished and rust-proofed.
4-2 Coating materials:
All use environmentally friendly coating materials that comply with national regulations
4-3 Coating materials:
The box adopts the color card number RUL7035. If you have special needs, please provide the color card number or color.
5.   Equipment door structure and manufacturing method :
5-1 door opening structure:
Double doors, lever handles for better sealing
5-2 Door opening method:
Turn left and right
5-3 Production method:
1. ♦ The door lock uses a lever-type handle.
2. ♦ 2 sets of door hinges.
3. ♦ Door panel and door frame: Q235 £ cold steel plate is connected after anti-rust treatment.
4. ♦ Door bottom plate: SUS 201 stainless steel plate bending, splicing, welding, polishing.
5. ♦ Door frame: Q235 £ channel steel, angle steel, square pipe, etc.
6. ♦ Door insulation: high density and high quality aluminum silicate cotton insulation and mineral wool insulation board filling.
7. ♦ The green and environmentally friendly silicon resistant rubber strip is compressed and compressed around, and the sealing effect is good.
6. Inlet and exhaust system location :
6-1 air inlet
The motor shaft hole is supplied with air and is located at the top of the device.
6-2 exhaust port (manual adjustment)
Install a manual exhaust valve on the top to adjust the exhaust volume
6-3 circulation system:
1. ♦ Air supply mode: Horizontal circulation air supply.
2. Fan power: 750W380V / 50HZ * 1
7.Heating system and heating time:
7-1 heating element:
Cover-type dust-free finned stainless steel U-shaped tubular electric heat generator is used to increase the heat dissipation area in a straight line. The heating element power is 1.2KW / piece for a total of 6. Divided into 1 group of heating control. Continuous service life can reach more than 20,000 hours. Unique safety type surface with low load heating, with anti-oxidation, stable performance, etc.
7-2 Quantity:
6 pieces
7-3 installation position:
Located in the side air duct of the device
8. Studio configuration
8-1 configuration trolley
The studio is equipped with 20 layers of screens, 10 layers on each side, and the material is made of SUS201 stainless steel plate.
8-2 partition bearing
The load-bearing capacity of each layer of partition is about 30 如 (if you want to increase the load, the price is negotiable)
9.Electrical equipment configuration: (Customer can specify the control electrical appliance brand, price is negotiable) Control voltage: 220V
9-1. Temperature controller
The main control adopts LED / intelligent / double digital display / temperature controller, control accuracy ± 1 ℃, with PID self-tuning adjustment, automatic constant temperature.
9-2. Temperature measuring device:
Two K-type temperature sensing devices, accurate temperature measurement ± 1% FS.
9-3. Time setting device:
HS48S-99.99 timing device, manual / automatic switch, when the temperature reaches the set temperature
The timer starts immediately, and the heating power is cut off when the time reaches the set range.
9-4. Sound and light alarm device:
APT / AD16 type acousto-optic alarm device, set the time constant temperature end alarm prompt.
9-5. Switch and indicator:
The self-priming switch is used for easy and simple operation.
9-6. Circuit breaker start:
The circuit breaker with leakage protection is activated, effectively protecting all electrical components.
9-7. Load output:
Use of contactor and solid state relay output to effectively protect the life of electrical components and use functions
9-8. Contactor
Adopted (Chint Electric)
9-9. Secondary mechanical protection:
Meet fire regulations
9-10. Other protection:
Overload protection, overcurrent protection, phase loss protection, overtemperature protection, etc.
10 Major electrical brands: The electrical equipment configured by the company meets national standards and the procurement channels are regular.
10-1 main control table:
,
Intelligent temperature control instrument (Xiamen Yudian)
10-2 over temperature protection
Chint
10-3 Alarm:
Chint
10-4 sensor:
Select Taiwan WELL high precision sensor.
10-5 switch indicator:
Using Shanghai Tianyi.
10-6 contactor:
Solid state output (Taiwan, Taiwan)
10-7   Intermediate relay:
Omron
10-8 circuit breaker:
Chint
10-9 time relay
Using normal
10-10 heating element:
Dirk
10-11 circulation fan:
Tenglong high temperature long shaft motor
10-12 electrical connection cable:
Far East Cable
10-13 Other electrical components:
Uses famous brands such as Chint, Omron, Schneider, etc.


Business negotiations
Telephone communication
Or online consultation
Communication oven model
And other basic information
Upon request
project plan
Reach an agreement
Start manufacturing
Installation test
Reach cooperation
Customer profile
Perfect maintenance
If something goes wrong
2 hours judgment
Maintenance within 2 days
professional team
trustworthy
Wujiang Asia-Pacific Electric Heating Equipment Co., Ltd. ? Copyright Ministry of Industry and Information Industry
Address: Tongxing Industrial Zone, Tongli Town, Wujiang City, Jiangsu Province Telephone: 0512-6333 3397 Mobile: 13962501069 Fax: 0086-0512-6302 0402
Website: ios-losst.com Email: 13962501069@163.com
七乐彩 欢乐拼三张 欢乐拼三张 天天电玩城